Mitsubishi HMI

MITSUBISHI PLC MODULE FX3U-232ADP-MB
This manual describes the part names, dimensions, mounting, and specifications of the product. Before use, read this manual and manuals of relevant products fully to acquire proficiency in handling and operating the product. Make sure to learn all the product information, safety information, and precautions. And, store this manual in a safe place so that you can take it out and read it whenever necessary. Always forward it to the end user. Registration MODBUS® is a registered trademark of Schneider Electric S.A. The company name and the product name to be described in this manual are the registered trademarks or trademarks of each company.
Effective April 2007 Specifications are subject to change without notice. © 2007 Mitsubishi Electric Corporation
Safety Precaution (Read these precautions before use.)
This manual classify the safety precautions into two categories:

• Delivery Time: READY STOCK

MODEL-MITSUBISHI-E1032 

Warning:Do not disconnect equipment unless power has been watched off or the area is known to be Non-hazardous substitution of components may impair suitability for class:DIV 2.

Features:

• 240 x 64 pixels
• FSTN display
• 240 x 64 pixels
• Project storage 12 MB
• Operating temperature 0 to +50 °C
• Ethernet and serial
• 8 keys / 16 LEDs

"MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series.
.Built in positioning function.
Voltage: 3 phase AC200VAC or single phase AC230V.
Compatible with "MR-J2S- CP-S084" - servo amplifier and interface unit "MR-J2S-TO1" positioning by CC-Link
Simply setting the point table MR-J2-40B Manual MR-J2-40B Specifications and Installation Guide.
AC servo can be used as the driving source of the field network MR-J2-40B
Using servo amplifier built-in positioning function, position data and speed data, you can set the CC-Link.
Start, stop and display can also be transmitted through the CC-Link.
Serial communication reduces wiring.