VP Industrial Electronics

MITSUBISHI PLC MODULE FX1N-40MR-001

• Max. number input/output: 40

• No. of inputs: 24

•  No. of outputs: 16

• Type of output: Relay

• Power supply: 100-240V AC

• Power consumption: 32W

• Shipping Weight (KG) : 1

Additional Information:

• Delivery Time: READY STOCK

Mitsubishi CC-LINK QJ61BT11N:

• These modules are available as master or local stations for CC-Link
• CC-Link parameters can be set on the Parameter Setting screen of the programming software GX Works 2 for MELSEC
• Setting a standby master station can maintain a data link even if there is something wrong with the regular master station. Additionally, a redundant function enables the master station to return to the system even during data link control at the standby master station in anticipation of the breakdown of the standby master station
• High-speed communication is available in remote I/O network mode only when slave stations are remote I/O stations (Parameter setting is not required either)

MITSUBISHI LINK UNIT QJ61BT11N  

Product DetailsCC-Link Network Master/Local Station
CC-Link (Control and Communication Link) is a network used for connecting PLC systems and remote devices (e.g. Digital I/O, variable speed drives, etc.) on one cable. CC-Link gives fast, deterministic performance with communication speeds up to 10Mbps. Flexible network construction allows the user to place field devices where they are needed and CC-Link can be extended up to 1200 metres without repeaters. Standby master function allows other CC-Link PLC stations to take over network control if the master fails, giving greater redundancy and availability.
Maximum transient data size (message) 480 words per station
Excellent for connecting Mitsubishi equipment together
Simple set-up, no programming needed with Mitsubishi Q Series
Wide variety of remote devices available
Allows PLC to PLC communication
Robust protocol with built in redundancy

Mitsubishi Q Series Communication Modules & Programming
Depth: 90.3 mm, Height: 98 mm, Width 27.4 mm for the RS232 Serial Communication Modules and CC-Link Network Master/Local Station.

Additional Information:

• Delivery Time: READY STOCK

ALLEN BRADLEY MICROLOGIX 1200 PLC  1762-L40BWA   

The 1762-L40BWA is a Programmable Logic Controller (PLC). This controller is a MicroLogix 1200 by Allen-Bradley. It features a total of Forty (40) Input and Output channels which specifically consists of Twenty-Four (24) Discrete inputs and Fourteen (14) Discrete Outputs. The input channels are designed for interfacing input devices that carry 24VDC via sinking and sourcing wiring configuration. The outputs are contact outputs that are rated for 25-125 VDC or 120 - 240 VAC with mechanical life of 20,000,000 cycles and rated for a minimum of 10A load.

This controller has an integrated 8-pin Mini DIN RS232 communication port that supports DH-485, DF1 Full and Half Duplex, Modbus Master and Slave and ASCII protocols. DF1, ASCII and Modbus in this controller operates in peer-to-peer configuration. Converters may be used to multiplex the serial port to allow communication to multiple devices. These converters may be an RS223 to Ethernet converter of RS232 to RS485 converter. DH-485 is ideal for connecting to a network bus with the use of an external converter such as a 1761-NET-AIC.

This controller requires installation to an enclosure that provides adequate protection to the device as the 1762-L40BWA is an electronic device. The enclosure temperature must be maintained at temperature of +0°C to +55°C. Appropriate climate control devices is recommended to be installed in the enclosure such as a heater, fan or combination of both, depending on the installation location.

This controller is configured using RSLogix 5000 programming software, a ladder programming software that is compatible with Windows XP, Windows 7, Windows Vista, Windows 8 and Windows 10 operating systems.

Additional Information:

• Delivery Time: READY STOCK

MITSUBISHI CPU UNIT A2ASCPU 

I/O points: 512.
Processing speed: sec/ 0.2u step.
Memory capacity: 64K bytes.
Program capacity: 14K step.
With the rapid development of microprocessor, computer and digital communication technology,
Computer control has been extended to almost all industrial fields.
Modern society requires manufacturing to respond quickly to market demand,
Production of small quantities, multi varieties, multi specifications, low cost and high quality products,
In order to meet this requirement,
Production equipment and automatic production line control system must have high reliability and flexibility,
PLC programming is to comply with the requirements of the emergence of it is based on a microprocessor based general industrial control device.
PLC programming is a digital computing operation of the electronic system,
Designed for applications in industrial environments.
It uses programmable memory,
An instruction used to perform logical operations, sequence control, timing, counting and arithmetic operations in its internal storage,
And through the digital, analog input and output, control of various types of machinery or production process.
Programmable controller and related equipment,
Should be easy to make the industrial control system to form a whole, easy to expand the principle design of its functions.

 

Output type: relay.
Output points: 12 points.
Load voltage: AC240/DC24.
Load current: 2A.
Connection mode: terminal row.
Common public end points: 4.
Sequential function flow chart language is designed to satisfy the sequential logic control.
The process of sequential process action is divided into steps and transformation conditions,
According to the transfer condition, the control system is distributed in the function flow sequence,
Step by step according to the sequence of actions MITSUBISHI A2ASCPU A2ASCPU
Each step represents a control function, represented by the box.
In the box, the ladder logic is used to complete the task of the corresponding control function.
This programming language makes the program structure clear and easy to read and maintain,
Greatly reduce the programming workload, shorten the programming and debugging time MITSUBISHI A2ASCPU.
Used in the system of the size of the school, procedures for more complex occasions.
Sequence function flow chart programming language features: to function as the main line, in accordance with the functional flow of the order of distribution, clear, easy to understand the user program,
Avoid the defect of ladder diagram or other languages,
At the same time, the use of ladder language to avoid the use of ladder programming,
Due to the complicated mechanical interlock, the structure of the user program is complex and difficult to understand,
User program scan time is also greatly reduced MITSUBISHI A2ASCPU. Frequency selection: 100KHZ.
Number of channels: 2 channels.
Input signal: DC5/12/24, 2 to 5mA.
Counter: 100KPPS/1 with the highest frequency.
A1SD62, A1SD62D and A1SD62E are 2 channel high speed counter components for AnS series PLC.
They are improved in comparison with A1SD61 in the following ways: the density of channels.
In order to require a higher resolution and operating speed of the application to provide a higher count rate, reduce costs.
The instruction list programming language is a programming language similar to assembly language mnemonic,
As well as assembly language by the operation code and the number of operations.
In the case of the computer for the PLC handheld programmer compile user program.
At the same time, the programming language of the instruction list corresponds to the ladder diagram programming language,

Additional Information:

• Delivery Time: READY STOCK

Additional Information:

• Delivery Time: READY STOCK

MODEL-MITSUBISHI GC35MH-16MR-D

Additional Information:

• Delivery Time: READY STOCK

The CIMON CM2-BP32EDR is a compact, high-efficiency Programmable Logic Controller (PLC) base unit designed for industrial automation applications, typically manufactured by CIMON, Inc.. It belongs to the CM2-BP series, which is specifically aimed at smaller applications requiring high-speed processing. The module features a rectangular, grey-colored design with, typically, a 24 VDC input power supply and an operating temperature range of 0°C to 55°C. It is widely used in control panels, with mounting options often suited for DIN rail installation. 

SERVO DRIVE-SEW MDX61B0075-5A3-4-00 9.5A 
SEW MC07A040-5A3-4-00  4KW 415V 
SEW MC07B0004-2B1-4-00 0.37KW 230V 
SEW POWER UNIT-SERVO DRIVE  MDX60A0110-5A3-4-00 24415VOLT  
SEW PROFIBUS MODULE DFP21B U0H11B 
SEW SERVO DRIVE MDV60A0022-5A3-4-C   5.5A415VOLT   
SEW SERVO DRIVE MDX60A0040-5A3-4-00  9.5AMP-415VOLT    
SEW SERVO DRIVE MDX60A0054-5A3-4-00 12.5AMP415VOLT    
SEW SERVO DRIVE MDX61B0014-5A3-400 1.5KW415VOLT   
SEW SERVO DRIVE MOVITRAC 0508 0.75KW 
SEW SERVO MC07B0008-5A3-4-00
SEW SERVO MC07B0022-5A3-4-00 2.2KW 415V 
SEW SERVO MDX61B0005-5A3-4-00 0.55KW 415V 
SEW SERVO MDX61B0055-5A3-4-00 12.5A 415V  
SEW SWRVO MC07B0005-2B1-4-00  0.55KW 230V 

Additional Information:

• Delivery Time: READY STOCK

WAGO FIELDBUS COUPLER CANOPEN 750-337

This fieldbus coupler connects the WAGO I/O System as a slave to the CANopen fieldbus. Data is transmitted via PDOs and SDOs.

 

The fieldbus coupler detects all connected I/O modules and creates a local process image. Analog and specialty module data is sent via words and/or bytes, digital data is sent bit by bit.

 

The local process image is divided into two data zones containing the data received and the data to be sent. The process data can be sent via the CANopen bus to a control system for further processing. The process output data is sent via the CANopen bus.

 

The data of the analog modules is stored in the PDOs according to the order in which the modules are connected to the coupler. The bits from the digital modules are sent byte by byte and also mapped in the PDOs. If the amount of digital I/O information exceeds eight bits, the coupler automatically starts with a new byte.

 

All entries of the object directory can be mapped as required in the 32 Rx PDOs and 32 Tx PDOs.

 

The complete input and output process image can be transmitted using SDOs.

 

Spacer modules can be set via software.

Additional Information:

• Item Code: PESXXXVIE2019090125
• Delivery Time: READY STOCK

Mitsubishi Analog Output:

• Manufacturer : Mitsubishi Electric
• Product No. : FX2N-4DA
• Product type : Analog Output Modules
• Power Supply: 5 VDC/30 mA (from main unit); 24 VDC/200 mA
• Analog Channels: 4 outputs
• Analog Input Range: -10 to 10 VDC / 0 to 20mA DC / 4 to 20 mA DC
• Resolution (voltage): 5mV (11 bit + sign)
• Related I/O points: 8

Mitsubishi Digital Output Module Melsec-qy10
The Mitsubishi digital output module has different switching elements for adaption to many control tasks.
This module has 16 relay output of 8A current rating.
Mitsubishi Q Series Digital & Analogue I/O Modules
The Q series is a modular system
if the application demands more input units you simply add more to the system. In this way, it is easy to add input signal capacity.
Module dimensions - Depth: 90 mm, Height: 98 mm, Width: 27.4 mm

Additional Information:

• Delivery Time: READY STOCK

MITSUBISHI OUTPUT MODULE Output Module
Model :- A1SY10
Product Type :- Relay Output
No. Of Points :- 16
Rated Load Voltage :- 240 VAC, 50/60 Hz, 24VDC
Max. Load Current :- 2 A/pt, 8 A/com
Dielectric Withstand Voltage :- 1500VAC
Max. Output Response time :- 

• OFF to ON :- 10ms
• ON to OFF :- 12ms

Additional Information:

• Delivery Time: READY STOCK

MITSUBISHI OUTPUT MODULE A1SY22 
Special features of the A1SY22

• Output modules with triac switches
• Potential isolation between process and control by means of an optocoupler is a standard feature
• Modules with potential isolation between the channels
• Modules with 16 connection points have removable terminal blocks with screws
• Assembled cables are available for the modules with D-sub plugs

Additional Information:

• Delivery Time: READY STOCK

Additional Information:

• Delivery Time: READY STOCK