VP Industrial Electronics

SIEMENS PLC S3700 SM332(6ES7 332-5HB01-0AB0 AO 12BIT

6ES7332-5HB01-0AB0 SIEMENS SIMATIC S7-300, Analog output SM 332, isolated, 2 AO, U/I resolution 12 bits, ..

6AG1332-5HD01-7AB0

Properties

• 4 outputs in one group
• The output can be selected by individual channel
  • - Voltage output
  • - Current output
• Resolution 12 bits
• Programmable diagnostics and diagnostic interrupt
• Electrically isolated to backplane bus interface and load voltage
• Supports parameter reassignment in RUN

SIMATIC S7-300, Analog output SM 332, isolated, 2 AO, U/I; resolution 11/12 bits, 20-pole, Removing/inserting with active backplane bus possible

SIMATIC S7-300, Analog output module, SM 332, with galvanic separation, U/I; Resolution: 11/12 Bits, 2 SA, Insert/Pull During Service with Active Back Bus

Additional Information:

• Item Code: PESXXXVIE2019090201
• Delivery Time: READY STOCK

MITSUBISHI PLC MODULE FX2N-128MR-ES-UL  

• Manufacturer : Fx2n Series Programmable Controllers

• Product No. : FX2N-128MR-ES/UL

• Product type : Mitsubishi Electric

• Max. number input/output: 128

• No. of inputs: 64

• No. of  outputs: 64

• Type of output: Relay

• Power supply: 100-240V AC

• Power consumption: 100VA

Additional Information:

• Delivery Time: READY STOCK

MITSUBISHI PLC MODULE FXON-16EYR-ES-UL 

• FX0N16EYRESUL
• DISCONTINUED BY MANUFACTURER
• EXTENSION BLOCK
• 16 POINT OUT
• 2 AMP
• 240 VAC
• 30 VDC
• FACTORY WARRANTY MAY NOT APPLY. RADWELL 2-YEAR WARRANTY INCLUDED

Additional Information:

• Delivery Time: READY STOCK

MITSUBISHI COMMUNICATION MODULE MELSEC-QJ71C24N 
High-speed, large-capacity communication of up to 960 words (in the case of MC protocol communication) at speeds up to 230.4 kbps is possible.
Data can be read and written from/to the sequencer from external devices (PC, display, etc.) using the MC protocol.
Non-procedural protocol communication is supported to permit data exchange between the sequencer and a given external device (barcode reader, measuring instrument, etc.) in any communication protocol specified by the external device.
Sequencers can be programmed and monitored from a programming tool based on RS-232 serial communication using the QJ71C24N(-R2).
The QJ71C24N(-R2) has a function supporting public network modems and is capable of initializing an applicable modem and connecting with the other device to communicate with any remote device or programming tool via the modem and a public network.
The QJ71C24N(-R2) has a remote password function that prevents illegal access to the Q-series sequencers using the QJ71C24N(-R2)'s modem function.

Additional Information:

• Delivery Time: READY STOCK

BECKHOFF MODULE CX9000-1001,CX9000-N030, CX9000-N000

Technical data CX9000-0000 Processor Intel® IXP420 with XScale® Technology, 266-MHz clock rate Internal flash memory 16 MByte Flash (internal, expandable up to 32 MByte) Internal main memory 64 MByte RAM (internal, expandable up to 128 MByte) interfaces 2 x RJ 45 (internal Switch), 10/100 MBit Diagnostics LEDs 1 x Power, 2 x LAN, 1 x L/A, 1 x flash access Clock internal battery-backed clock for time and date Operating system Microsoft Windows CE Control software TwinCAT-CE-PLC-Runtime or TwinCAT-CE-NC-PTP-Runtime Power supply 24 VDC (-15%/+20%) To meet the UL requirements use a 4 A fuse or a power supply that has to satisfy NEC class 2! Dielectric strength 500 Vrms (supply/internal electronics) I/O connection E-bus (EtherCAT Terminals) NOVRAM 128 kByte I/O-DPRAM - Power supply I/O terminals 2 A Max. power loss 6 W (including CX9000-xxxx system interfaces) Dimensions (W x H x D) 59 mm x 100 mm x 91 mm weight ca. 250 g Operating / storage temperature 0° C ... +50° C / -25° C ... +85° C Relative humidity 95% no condensation Vibration/shock resistance conforms to EN 60068-2-6 / EN 60068-2-27/29 EMC resistance burst/ ESD conforms to EN 61000-6-2/EN 61000-6-4 Protection class IP 20

Additional Information:

• Delivery Time: READY STOCK

BECKHOFF MODULE EL2809

EL2809 | HD EtherCAT Terminal, 16-channel digital output 24 V DC, 0.5 A

The EL2809 digital output terminal connects the binary control signals from the automation device on to the actuators at the process level with electrical isolation. The EL2809 is protected against polarity reversal and processes load currents with outputs protected against overload and short-circuit. The EtherCAT Terminal contains 16 channels, whose signal states are displayed by LEDs. The terminal is particularly suitable for space-saving use in control cabinets. The connection technology is particularly suitable for single-ended inputs. All components have to use the same reference point as the EL2809. The power contacts are looped through.

The outputs are fed via the 24 V power contact in the EL2809. The conductors can be connected without tools in the case of solid wires using a direct plug-in technique.

The HD EtherCAT Terminals (High Density) with increased packing density feature 16 connection points in the housing of a 12 mm terminal block.

Additional Information:

• Delivery Time: READY STOCK

ge fanuc controller module IC200UDR001-BF

Versamax micro 120V 240 AC power supply 14 point PLC 24VDC in relay out. PLC IC200UDR001

The GE Fanuc IC200UDR001 module is a PLC module and it belongs to the Versamax product line. This unit is a 14-point micro PLC module that comes with 8 DC inputs and 6 normally open (NO) relay outputs. These outputs control devices with output voltage ratings of 5 to 250 Volts AC or 5 to 30 Volts DC. This PLC module operates on a nominal input power range of 100 to 240 Volts AC. Other notable features of this module include a memory capacity of 9K words, a register memory capacity of 256 words, support for up to 4 expansion units, and a RAM that has capacitor backup. It also features a memory protection switch that can be used for clearing severe faults. The IC200UDR001 PLC module supports up to 8 slave devices for every RS-485 network at maximum with a typical scan rate of 1.3 ms/K for the Boolean logic.

The GE Fanuc IC200UDR001 PLC module can be set to provide integral high-speed counter operation as well as pulse operation. It has counters that can detect the rapid pulse signals at a frequency of up to 10 kilohertz to serve a variety of industrial applications, including process control and flow meter applications. It has a 24 Volts DC power supply for the DC input circuits as well as the input devices. This unit has relay outputs which are configurable as counter outputs, but the outputs of this PLC module are not configurable as pulse train outputs or PWM outputs. The IC200UDR001 PLC module also comes with an expansion connector located on the top. It has an input voltage rating of 24 Volts DC, a typical input current rating of 7.5 milliamps, an input resistance of 2.8 kiloohms, and a configurable response time of 0.5 to 20 milliseconds.

Additional Information:

• Delivery Time: READY STOCK

Additional Information:

• Delivery Time: READY STOCK

BECKHOFF MODULE EL1809 

Special features:

• input specification type 1/3
• no bouncing due to mechanical switches thanks to 3 ms input filter
• tool-free connection by direct plug-in technique for solid wire conductors
• space-saving use in the control cabinet
• direct connection of multi-channel sensors in 1-wire connection technology in the smallest space
• increased packing density with 16 connection points in the housing of a 12 mm terminal block

We are engaged in offering the best quality product to our clients. Our range of all products is widely appreciated by our clients.

MODEL-CAREL-PGD00100F00

Additional Information:

• Item Code: ES202103250