VP Industrial Electronics

CLIPSAL 12 CHANNEL FREE RELAY C BUS 2 
Product Range 5102RVF - C-Bus Two Channel Voltage Free Relay (240V) E5102TRVF - C-Bus Two Channel Voltage Free Relay (110V) Description The 5102RVF/E5102TRVF Two Channel Voltage Free Relay is a C-Bus output device that provides two pairs of normally-open relay contacts for general switching applications.

The Two Channel Voltage Free Relay Unit comprises two relay switches, controlled by the C-Bus network. Manual override facilities are available, permitting stand alone operation in case of a power loss on the C-Bus network. A special programming mode can be used to configure the unit prior to connection of the mains supply. The unit isolates the mains power from the safe extra low voltage C-Bus network. 

Additional Information:

• Delivery Time: READY STOCK

CLIPSAL 12 CHANNEL FREE RELAY C BUS 2

The L5512RVF Series units are C-Bus relay-switching devices designed to be mounted in electrical switchboards or similar enclosures. For ease of installation, they are DIN rail mounted, measuring 12 DIN modules wide. Twelve independent voltage free relay contacts are provided for general switching applications. The units include all C-Bus Learning features, which allow the units to be programmed without the need for a PC connected to the system. Alternatively, units can be programmed via a PC and the C-Bus Installation software.

The Series includes units complete with 10A rated relays for resistive, inductive or fluorescent loads and separate units complete with relays rated at 10A resistive load and 1A fluorescent load. The units consume no current from the C-Bus network during normal operation.

The Series includes units available both with and without a 200mA C-Bus power supply for powering other C-Bus devices connected to the network (e.g., C-Bus Key Input Switches, Touchscreens, PIR detectors, etc). C-Bus connections are conveniently achieved at the unit through the use of RJ45 connectors, allowing similar units to be quickly looped together.

This Series of C-Bus units is capable of generating a C-Bus clock signal and providing a C-Bus network burden. Both the clock signal and the burden are selectable through the C-Bus Installation software. Local toggle buttons are included to allow individual channels to be toggled at each unit, as well as via C-Bus commands. Remote ON and OFF facilities are available, permitting all channels to be turned ON or OFF without C-Bus network communication. The unit optically isolates the mains power from the safe extra low voltage C-Bus network.

LED Indicators are provided to show the status of the C-Bus Network and the status of the unit. Like all the other units that make up a C-Bus system, the DIN rail C-Bus units are Australian designed, developed and manufactured by Clipsal Integrated Systems Pty Ltd.

Additional Information:

• Delivery Time: READY STOCK